![]() |
6oz fiberglass cloth taped into place. I hadnt noticed the cloth had shifted before I cut it at the bow. |
![]() |
I left enough extraneous area to make it easy to cut the cloth after the side was soaked with epoxy. |
![]() |
Ive found that its much easier to remove the tape by pulling it AWAY from the fiberglass cloths frayed edge than toward it. MUCH less hassle. |
![]() |
Cloth wetted out with epoxy resin & trimmed along the bottom. |
![]() |
Because I hadnt noticed that the cloth shifted earlier, I cut away too much around the bow, and did not have enough cloth to lap over onto the port side. |
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhXsteKyIRyBGfIw2M6h4gGYbbpU5KanX2vYoGUXZ53ox1SZc-fCACqCZK3eNnr7M3mg7J6_RQB45CLgJFupA5T1t_zuM6KJGZQyGHQEqRNVun1xMjqwO2QLR8OPdWPefoxdLIaGI1333X0/s1600/IMG_7974.jpg)
![]() |
I mis-judged and mixed WAY too much epoxy, so I went ahead and fiberglassed part of the port side using the scrap cloth cut from the bow area. |
0 komentar:
Posting Komentar